Contact Us

From transporting a dishwashing machine into your house to affixing the water connections, setting up a dishwasher can occupy to five hours. If you do not have the right tools, it might take even much longer. To make your life easier and also to prevent mounting a dish washer incorrectly, we suggest working with an expert plumber. A plumber will certainly have the right tools accessible and can mount your new dishwashing machine in under 2 hrs. Maintain reviewing to learn why you should hire a plumber if you're not rather convinced yet.

 

A Plumber Can Evaluate the Supply Lines

A supply line, especially a dishwashing machine connector, attaches the dishwashing machine to a water resource. If you get a new supply line, a plumber can ensure that the line works with both your dishwasher as well as water source. A specialist plumber can check it to guarantee that it's in excellent condition as well as does not have any type of leakages if you determine to use an existing supply line.

 

An Improper Installation Can Void the Dishwashing machine's Service warranty

Prior to setting up a dishwashing machine on your own, you need to review the service warranty meticulously. Unless you are helpful and have experience setting up dishwashers, you must hire a plumber so you don't risk your warranty.

 

Setting Up a Dishwashing Machine Calls For a Selection of Equipments

If you do not have a range of tools on hand, you may need to make a journey to Lowe's or Home Depot. To install a dishwashing machine, you need the adhering to devices: pliers, a flexible wrench, a collection of screwdrivers, a tube cutter, and hole saws.

 

Not Mounting Your Dishwashing Machine Appropriately Can Lead to a Mountain of Issues

Not only can mounting a dishwasher appropriately invalidate your warranty, yet it can additionally produce a mess. If you incorrectly mount your dishwashing machine to the waste disposal, you might discover pungent scents or have deposit on your recipes.

 

A Plumber Can End Up the Job Affordably as well as Swiftly

You do not intend to get stuck washing your meals by hand. A plumber can install your dishwashing machine in one to 2 hours. The ordinary plumber will not charge more than a pair of hundred dollars to install your dish washer. Why risk your guarantee and possibly need to acquire a brand-new dishwasher? Take the secure as well as very easy path by hiring a plumber.
From carrying a dishwashing machine into your home to attaching the water connections, mounting a dishwasher can take up to five hrs. To make your life easier as well as to avoid installing a dish washer incorrectly, we suggest working with an expert plumber. A plumber will have the right devices on hand as well as can install your new dish washer in under 2 hrs. A supply line, particularly a dish washer port, attaches the dishwasher to a water source. Unless you are useful as well as have experience setting up dishwashing machines, you must employ a plumber so you do not risk your guarantee.

 

How To Install A Dishwasher

 

Installing A Dishwasher Yourself

 

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

 

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

 

Steps Involved In Dishwasher Installation

 

Step One: Gather the Necessary Supplies

 

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

 

• A screwdriver


• • A hose clamp


• • Duct tape (optional)


• • A brass fitting


• • Teflon tape


• • A pair of pliers


• • An adjustable wrench


• • A drill


• • Braided steel water line


• • A pair of rubber hand gloves (optional)


• • Wire nuts

 

Step Two: Take Safety Measures

 

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

 

Step Three: Remove the Old Dishwasher

 

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

 

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

 

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

 

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

 

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

 

Step Four: Install the New Dishwasher

 

Connect the Water Supply

 

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

 

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

 

Attach the Drain Line

 

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

 

Slide the Dishwasher into Place

 

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

 

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

Call Today